Removing and installing/replacing speaker (mid-range speaker, in instrument panel) (4' Series Coupe/Convertible, 4' Series Gran Coupe Sedan)

Special tools required:

Unclip trim (1) with special tool 00 9 327 from latch mechanisms and remove upwards.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining lugs and clamps at marked points must not be damaged.

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 65 13 05AZ .

Remove mid-range speaker (2) upwards from dashboard (3).

Disconnect plug connections underneath.

Remove mid-range speaker (2).

Courtesy of BMW OF NORTH AMERICA, INC.