Replacing left LED fan left (outer) (4' Series Coupe/Convertible, 4' Series Gran Coupe Sedan)
Unlock and remove cover (1).
Turn protective cap (1) counterclockwise and remove.
IMPORTANT:
Risk of damage due to moisture penetration!
Installation note:
Check seal. Replace protective cap (1) if necessary.
COMPLY WITH INSTRUCTIONS FOR REPLACING THE PROTECTIVE CAP .
Protective cap (1) must lock correctly!
Turn the protective cap (1) clockwise to end stop (A)!
Release screw (1).
Tightening torque 1.5 Nm
Remove LED fan (3) and unlock and disconnect plug connection (1).