Installing headlight repair kit (4' Series Coupe/Convertible, 4' Series Gran Coupe Sedan)

Necessary preliminary work: 

• REMOVE HEADLIGHT .

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off grommet (1) towards the top.

Unfasten screws (2).

Carefully raise module (3) until the plug connection (4) is visible.

Release lock from connector (4) with suitable tool (5) and detach plug connection (4).

Pull off module (3) upwards.

Courtesy of BMW OF NORTH AMERICA, INC.

Courtesy of BMW OF NORTH AMERICA, INC.

1. Remove holder as far as illustrated.
2. Cover opening (1) with suitable means, e.g. rags, so that no dirt/debris falls into the headlights.

   Remove holder as far as illustrated.

3. Fit holder from repair kit as illustrated and secure with screws.
4. Remove rags out of the opening (1).

   Install module (2) and tighten with screws.

   Fit holder from repair kit as illustrated and secure with screws.

After installation: 

• INSTALL HEADLIGHT .
• ADJUST HEADLIGHTS .