REP-TAT-P-1134-01 Remove all valves

WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: RISK OF DAMAGE
Contaminant or foreign body.
Contamination can result in malfunctions, loss of function or leaks.

Adhere to the utmost cleanliness.
Protect components from contamination e.g. by covering.
Close off line connections with seal plugs.

Equipment specification B38
Twist the device (2) on the crank (1) 180°.

Courtesy of BMW OF NORTH AMERICA, INC.
Equipment specification B46/B48
Turn the device (2) on the crank (1) 180° in arrow direction .

Courtesy of BMW OF NORTH AMERICA, INC.
Equipment specification B58
Turn the device (2) on the crank (1) 180° in arrow direction.

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock the special tool 0 494 370 (11 9 005) in the direction of the arrow .

Courtesy of BMW OF NORTH AMERICA, INC.
Equipment specification B38
Remove special tool 0 494 373 (11 9 008) if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Equipment specification B46/B48
Remove special tool 0 494 373 (11 9 008) if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Equipment specification B58
Pull out and remove special tools 0 494 371 (11 9 006), 0 494 372 (11 9 007) and 0 494 373 (11 9 008) in the arrow direction.

Courtesy of BMW OF NORTH AMERICA, INC.
Push the valve stem (1) into the cylinder head in the direction of the arrow .

Courtesy of BMW OF NORTH AMERICA, INC.
Remove the valve (1) and position in special tool 0 495 105 (11 4 480) in order.

Courtesy of BMW OF NORTH AMERICA, INC.