REP-TAT-P-1133-01 Remove all roller cam followers

WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.

Detach and remove the roller cam followers (1) on the intake side from hydraulic valve clearance compensating elements (arrows).
Place all the roller cam followers (1) in order in the special tool 0 495 105 (11 4 480) .

Courtesy of BMW OF NORTH AMERICA, INC.
Detach and remove the roller cam followers (1) on the exhaust side from hydraulic valve clearance compensating elements (arrows).
Place all the roller cam followers (1) in order in the special tool 0 495 105 (11 4 480) .

Courtesy of BMW OF NORTH AMERICA, INC.