REP-TAT-P-1141-03 Install the oil vacuum pump

WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.

Check

Check the correct position of the lining sleeves (1) and whether or not they are damaged.

Courtesy of BMW OF NORTH AMERICA, INC.

Result

» Lining sleeves (1) are damaged or missing.

Measure

Replace the lining sleeves (1).

Replace sealing ring (1).
Parts: Sealing ring

Courtesy of BMW OF NORTH AMERICA, INC.

Insert oil vacuum pump (1) into the drive chain (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Position the oil vacuum pump (2) correctly on the fitting sleeves.
Tighten the screws (1).

TIGHTENING TORQUES SPECIFICATION

Oil pump to crankcase
External Torx socket M8x35	tightening torque	19 Nm

Courtesy of BMW OF NORTH AMERICA, INC.