General notes on troubleshooting
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
The following notes must be observed in order to find the root cause of faults when problems are reported, and to prevent the unauthorized, i.e. inappropriate, replacement of the exhaust turbocharger:
- Tracking down and verifying the complaint: If possible, any problem reported ('complaint') should be tracked down and verified on the vehicle. The parameters or marginal conditions prevailing at the time the problem was reported need to be noted down.
- Diagnosis: As a first step, diagnosis must be performed using the diagnostic system. Faults on sensors and actuators may be responsible for 'complaints', i.e. reported problems, which may also be associated with the exhaust turbocharger in some way. For this reason, faults on sensors and actuators must first be remedied if these are stored in the fault memory. In addition, the crankcase ventilation system is important for the oil supply to the exhaust turbocharger. If the pressure in the crankcase is too high, the oil supply to the exhaust turbocharger is endangered, and oil leakage may occur at the exhaust turbocharger. The stored charging pressure control faults must then be investigated or troubleshooting must take place on the exhaust turbocharger.
- Repair history:
If possible, check to find out whether repairs have already been made on or near the exhaust turbocharger following similar reported problems.
- With any repeated complaint with different fault patterns, the problem could have arisen during the last repair. Problems could have arisen in conjunction with installation, connections or the ingress of foreign bodies.
- In the event of identical complaints, it is highly probable that the actual cause of the fault has not been remedied.
Symptoms:
- Leaks
- Noise
- Lack of power