LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> 340i xDrive Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Engine Repair (F30, 6-CYL RWD) (4 Of 4)) >> 11 53 Thermostat And Engine-Mounted Coolant Lines >> 11 53 942 Removing and installing (replacing) the connecting branch on the engine block >> REP-TAT-P-1153-25 Replacing the connecting bracket on the engine block

REP-TAT-P-1153-25 Replacing the connecting bracket on the engine block

WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATION

Coolant temperature sensor to crankcase connecting bracket
M12X1, 5 tightening torque  13.5 Nm
G12729092Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals