REP-TAT-P-1153-02 Install coolant feed line
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
- Replace the O-rings (1).
Parts: O-rings
- Insert the coolant feed line (1).
- Position the coolant feed line (2) at the engine block.
- Tighten down screw (1).
TIGHTENING TORQUES SPECIFICATION
| Coolant feed line to engine block | |
|---|---|
| M6 x 12 | 8 Nm |
- Position the coolant feed line (1) at the exhaust turbocharger.
- Position the coolant return line (2) at the exhaust turbocharger.
- Tighten down screw (1).
TIGHTENING TORQUES SPECIFICATION
| Coolant feed line/coolant return line to exhaust turbocharger | |
|---|---|
| M6 x 12 | 8 Nm |