REP-TAT-P-1153-01 Remove heat management module
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
- Unlock and disconnect connector (1).
- Unclip positive battery cable in area (2).
- Unlock and detach the coolant hoses (3) and (4).
- Loosen clamp (5) and detach the coolant hose.
- Loosen screws (1) to (3).
- Feed out the heat management module (1) to the outside rear out of the component carrier.