REP-TAT-P-1151-02 Installing the electric coolant pump for the charge air cooler/air conditioning condenser
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
- Position electric coolant pump (2).
- Close the holder (1).
- Tighten nut (2).
TIGHTENING TORQUES SPECIFICATION
| Electric coolant pump to holder | ||
|---|---|---|
| M6 | tightening torque | 8 Nm |
- Connect connector (1).
NOTE:
Make sure that the connections are locked correctly. The locks must engage audibly.
- Connect and lock the coolant hoses (1) and (2).