REP-TAT-P-1128-02 Installing the belt tensioner
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
- Position belt tensioner (2).
- Tighten down screws (1).
TIGHTENING TORQUES SPECIFICATION
| Belt tensioner to alternator | ||
|---|---|---|
| M8 x 30 | tightening torque | 28 Nm |
- If applicable, tension the belt tensioner at the hexagonal head (1) up to the stop.
- If applicable, secure the belt tensioner in place with special tool 0 496 268 (11 0 390) .