REP-TAT-P-1114-01 Remove rear timing case cover
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
Unlock the connector (1) and detach it off the crankshaft sensor.
 Courtesy of BMW OF NORTH AMERICA, INC.
|
Loosen screws in the order (11) to (1).
 Courtesy of BMW OF NORTH AMERICA, INC.
|
Carefully loosen and remove the timing case cover.
NOTE:
Increased force may be necessary during disassembly because the component is bonded with liquid sealing compound.