REP-TAT-P-1115-02 Install engine ventilation line

WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: TECHNICAL INFORMATION
Detents, guides and mounting elements must not be damaged or missing.

Mount the engine ventilation line (3) on the clean air pipe.
Make sure that the marked detents are locked correctly.
Clip the cable clip (2) in at the engine ventilation line (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Connect and lock both connectors (1).
Clip the engine ventilation line (1) in at the cylinder head cover.

Courtesy of BMW OF NORTH AMERICA, INC.