REP-TAT-P-1114-01 Remove front engine encapsulation
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
- Unlock the ventilation line (1), detach it off the tank vent valve and unclip in the highlighted area.
- Unlock and detach the ventilation line (2).
- Unlock and detach the connectors (1) and (2).
- Unclip the wiring harness (3) in the highlighted areas and put to one side.
- Undo screw for the ground cable if necessary.
- Carefully remove the engine encapsulation (1).