REP-TAT-P-1122-02 Installing the flywheel

WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.

Make sure the magnet wheel (1) is installed correctly.

Courtesy of BMW OF NORTH AMERICA, INC.
Replace all flywheel bolts.
Parts : Flywheel bolts

NOTE: TECHNICAL INFORMATION
Clean screw thread.

Position the flywheel and insert the screws.
Secure the flywheel with special tools 0 496 171 (11 9 811) and 0 494 793 (11 9 265) and the transmission bolt (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Tighten all flywheel bolts with the special tool 0 491 018 (11 4 180).

TIGHTENING TORQUES SPECIFICATION

Flywheel to crankshaft
M12x1.5 Replace screws.	Joining torque	45 Nm
M12x1.5 Replace screws.	Angle of rotation	40°

Unscrew the transmission bolt (1) and disassemble special tools 0 496 171 (11 9 811) and 0 494 793 (11 9 265).