REP-TAT-P-1112-26 Installing the cylinder head on the special tool
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
- Mount special tool 0 494 362 (11 9 000) on special tool 0 495 187 (00 2 300) .
- Position the cylinder head (1) and exhaust turbocharger using the workshop crane (2) and special tool 0 490 567 (11 0 020)
on special tool 0 494 362 (11 9 000)
.
- Screw the cylinder head (1) to the special tool 0 494 362 (11 9 000) in the highlighted area.
NOTE:
Secure the second screw connection once the exhaust turbocharger has been removed.