REP-TAT-P-1112-16 Clean sealing surfaces
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
RISK OF DAMAGE
Damage to the surface.
The use of metal-cutting tools (e.g. emery cloth) to clean the surfaces can damage them and lead to leaks or engine damage.
Damage to the surface.
The use of metal-cutting tools (e.g. emery cloth) to clean the surfaces can damage them and lead to leaks or engine damage.
- Do not use any metal-cutting tools.
- Remove coarse backlogs from the sealing surfaces of the cylinder head and the crankcase using special tool 0 495 103 (11 4 471) .
NOTE:
RISK OF DAMAGE
Damage to the surface.
The use of metal-cutting tools (e.g. emery cloth) to clean the surfaces can damage them and lead to leaks or engine damage.
Damage to the surface.
The use of metal-cutting tools (e.g. emery cloth) to clean the surfaces can damage them and lead to leaks or engine damage.
- Do not use any metal-cutting tools.
- Remove fine backlogs from the sealing surfaces of the cylinder head and the crankcase using special tool 0 495 104 (11 4 472)
.
- Clean all blind holes of the cylinder head and the engine block.
- Remove special tool (B) from special tool 2 364 711 .