Removing and installing partition wall attachment part
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
Removing:
Loosen screws (1).
Remove the partition wall attachment part (2).
 Courtesy of BMW OF NORTH AMERICA, INC.
|
Installing:
Position the partition wall attachment part (2).
Tighten the screws (1).
Tightening torque: 2.3 Nm.
Courtesy of BMW OF NORTH AMERICA, INC.
|