Removing and installing lower right engine bulkhead

WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.

Removal:

Release screws (1).

G12701194

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nuts (1).

Remove engine bulkhead (2).

G12701195

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove partition wall (2) attachment.

G10098374

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Position partition wall (2) attachment.

Tighten down screws (1).

G10098374

Courtesy of BMW OF NORTH AMERICA, INC.

Position engine bulkhead (2).

Tighten down nuts (1).

G12701195

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screws (1).

Tightening torque: 19 Nm.

G12701194

Courtesy of BMW OF NORTH AMERICA, INC.