REP-TAT-P-1112-02 Install acoustic cover
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
RISK OF DAMAGE
Damage to the acoustic cover.
Jerky movements during disassembly and excessive application of force during installation may result in breakage of the acoustic cover.
Damage to the acoustic cover.
Jerky movements during disassembly and excessive application of force during installation may result in breakage of the acoustic cover.
- Disassemble or mount the acoustic cover carefully.
- Disassemble or mount snap-lock couplings of the ball pivots one after the other.
- Disassemble or mount acoustic cover only at temperatures >20 °C.
- Use only distilled water as an auxiliary material during installation, no lubricants.
- Check the rubber mount 1
for a correct seat of the acoustic cover.
- Install the acoustic cover 1 and fasten in the rubber mounts (markings).