11 00... Removing and installing/replacing rear acoustic cover (corrosion protection)

WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove center bulkhead upper part sound insulation

Removal:

Thread out acoustic cover (1) to top of the guides in the marked areas.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Check acoustic cover (1) for cracks and damages.

Replace faulty acoustic cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Position the acoustic cover (1).

NOTE: Pay attention to a correctly installed acoustic cover of the guides in marked areas.

Courtesy of BMW OF NORTH AMERICA, INC.