REP-TAT-P-1100-20-10 Attach the engine support beam to the vehicle

WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.

Position the engine bridge with the help of an auxiliary person.
Make sure that the engine support beam is properly positioned at the correct mounting points.

Courtesy of BMW OF NORTH AMERICA, INC.

CAUTION: Components connected to the engine joint or cross member.
Injury hazard!

Check lifting eyes and engine mounting brackets for damage, e.g. cracks.
Attach the component to correctly mounted engine joints or cross members only.
Only lift the component, do not shift it forwards, backwards or in transverse direction.

Courtesy of BMW OF NORTH AMERICA, INC.

Attach the chain with the hook (1) into the engine mounting bracket (2).
Tighten all screws and nuts of the engine support beam!