11 41 Engine oil pumps
WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.
11 41 OIL PUMPS WITH STRAINER AND DRIVE - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Intake pipe to oil pump | B46M0/O0/B48M0/O0 | M6 x25 | 8 Nm | |
| 2AZ Oil/vacuum tandem pump to crankcase | B46M0/O0/B48M0/O0 | M8 | 19 Nm | |
| 3AZ Center oil deflector screw connection | B46M0/O0/B48M0/O0 | M8x35 | Replace screws. | |
| 1. Joining torque | 15 Nm | |||
| 2. Angle of rotation | 45° | |||
| 4AZ Oil deflector screw connection, outer | B46M0/O0/B48M0/O0 | M8x35 | Replace screws. | |
| 1. Joining torque | 15 Nm | |||
| 2. Angle of rotation | 45° | |||
| 5AZ Sprocket to oil pump | B46M0/O0/B48M0/O0 | M10 |
IMPORTANT:
left-hand thread Replace screw. |
|
| 1. Joining torque | 5 Nm | |||
| 2. Angle of rotation | 90° | |||
| 6AZ Hydraulic valve to engine block | B46M0/O0/B48M0/O0 | M6x18 | 8 Nm | |