33 55 041 Replacing anti-roll bar link for anti-roll bar, bar on left or right

WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove the REAR WHEEL .

Release nuts (1); if necessary, grip at inner Torx socket.

Tightening torque, refer to: 33 55 2AZ .

Remove anti-roll bar link (2).

Refer to: INSTALLATION NOTE

Replace self-locking nuts.

Courtesy of BMW OF NORTH AMERICA, INC.