33 00... Rear axle: wheel/chassis alignment check must be carried out after the following work
WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.
A WHEEL ALIGNMENT CHECK must be carried out after the following work:
- Release the following screw connection:
- Wishbone to rear axle support (2)
- Toe arm on rear axle support (4)
- Toe arm to wheel carrier (4)
- Camber arm on rear axle support (5)
- Camber arm to wheel carrier (5)
- Replacement of following parts:
- Rear axle support (1)
- Wishbone (2)
- Wheel carrier (3)
- Toe arm (4)
- Toe arm (5)
- Ball joint in wheel carrier
- Rubber mount in wheel carrier