21 52 Clutch operation (hydraulic)
WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.
21 52 CLUTCH OPERATION (HYDRAULIC) - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Clutch slave cylinder to clutch housing/transmission housing | F06/F10/F11/F12/F13/F18/F20 N47/F25/F26/F30/F31/F34 N47/F80/F82/F83 | Replace nuts | 22 Nm | |
| F20/F21/F22/F23/F30/F31/F32/F33/F34/F35-N13/N20/F10-N20/F36/F87 | M8x25 | Replace screws | 19 Nm | |
| 2AZ Clutch master cylinder on bearing support | F20/F21/F22/F23/F30/F31/F32/F34/F35/F36/F80/F82/F83/F87 | 22 Nm |