31 35 000 Removing and installing/replacing front anti-roll bar
WARNING: This page is about a different car, the 2018 BMW 340i, 2018 BMW 330i, 2017 BMW 340i, 2017 BMW 330i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove the ANTI-ROLL BAR LINKS FROM ANTI-ROLL BAR .
- Lower the FRONT AXLE SUPPORT .
Unscrew nuts (1).
Tightening torque, refer to: 31 35 1AZ .
Remove retaining brackets.
Remove anti-roll bar (2) forward.
Installation note:
Replace nuts (1).
Check both rubber mounts for damage.
- In the event of rubber mount damage, the anti-roll bar must be replaced.