31 00... Front axle + steering: wheel/chassis alignment check must be carried out after the following work
WARNING: This page is about a different car, the 2018 BMW 340i, 2018 BMW 330i, 2017 BMW 340i, 2017 BMW 330i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
A WHEEL ALIGNMENT CHECK must be carried out after the following work:
Release the following screw connections:
- Steering box to front axle support
- Lower wishbone to front axle support
- Track rod end to track rod
Replace the following components:
- Steering box (1)
- Front axle support (2)
- Wishbone, bottom (3)
- Track rod end (4)
- Track rod (5)
- Swivel bearing (6)