REP-TAT-P-3233-02-02_F30 Installing the steering wheel
WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.
Installing the steering wheel (standard steering wheel)
- Check the neutral position of the clock spring on the steering column switch cluster (SZL) using the yellow mark (1).
- Align and connect the steering wheel using the mark (1) and the mark (2) on the steering column.
- Route the wiring and connect the connector (1).
- Tighten down screw (2).
TIGHTENING TORQUES SPECIFICATION
| Steering wheel to steering column | |
| M14 | 62Nm |
Installing the steering wheel (sports steering wheel)
- Check the neutral position of the clock spring on the steering column switch cluster (SZL) using the yellow mark (1).
- Align and connect the steering wheel using the mark (1) and the mark (2) on the steering column.
- Route the wiring and connect the connector (1).
- Tighten down screw (2).
TIGHTENING TORQUES SPECIFICATION
| Steering wheel to steering column | |
| M14 | 62Nm |