REP-TAT-P-3231-02-01_F30 Install steering column shroud lower section
WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.
Prerequisite
Steering column in top and raised position.
- Connect the connector (2) of the ring aerial and if applicable the connector (1) of the steering column adjustment.
- Tilt the steering column shroud lower section upwards towards the steering column.
- Align the steering column shroud lower section with the steering column using the retaining lugs and press upwards up to the limit position.
- Slightly press the steering column shroud lower section together on both sides and then completely press it upwards until the retaining lugs engage.
Follow-up work