LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> 340i xDrive Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 266 (Front Axle - Tightening Torques (F30, 4-CYL RWD)) >> Output Shaft

Output Shaft

WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.
OUTPUT SHAFT - TIGHTENING TORQUE SPECIFICATION

Output shaft to wheel bearing 
M16
Replace collar screw and compression spring.		 Joining torque  210 Nm
Angle of rotation  90°
scientia non olet · About LEMON Manuals