22 11 001 Replacing right engine mount

WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove the right ENGINE SUPPORT ARM .

Removal:

Unscrew screws (1).

Remove engine mount.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

INSTALLATION NOTE:

Rubber part (1) of engine mount must point to center of vehicle.

Courtesy of BMW OF NORTH AMERICA, INC.

Install engine mount (2).

Tighten down screws (1).

Tightening torque, refer to: 22 11 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Install the ENGINE SUPPORT ARM on right.