23 11 Housing with lid

WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.

23 11 HOUSING WITH LID - TIGHTENING TORQUE SPECIFICATION

	Type	Thread	Dimension
16AZ Support plate on the intermediate housing	265/Sport	M6	9 Nm
17AZ Support plate for the bearings on the housing	S5D 310Z/S5D 320Z/S5D 200G/S5D 250G	M6	10 Nm
18AZ Support plate on the housing	S5D 320Z SMG	M6	5.5 Nm

TIGHTENING TORQUE SPECIFICATION

Transmission designation	Type	Thread	Dimension
1AZ Transmission housing, rear section/front section	B/C/D/E/F/G/H/I/7-speed SMG		22 Nm
2AZ Cover with guide tube/transmission case	B/C/D/E/F/G/H/I/C/7-speed SMG	M8 x 22	18 Nm
	B/C/D/E/F/G/H/I/C/7-speed SMG	M8 x 30	25 Nm
	B/C/D/E/F/G/H/I/C/7-speed SMG	M6	10 Nm
3AZ Bearing cap/sealing flange	B/C/D/E/F/G/H/I/7-speed SMG		10.5 Nm
4AZ Reverse gear wheel axle to intermediate housing	B/C/D/E/F/G/H/I/7-speed SMG		49 Nm
5AZ Retaining plate for reverse gear wheel axle to intermediate case	B/C/D/E/F/G/H/I/7-speed SMG		25 Nm
6AZ Transmission closing plate	B/C/D/E/F/G/H/I/7-speed SMG	M6	8 Nm
7AZ Transmission oil strainer in transmission	G-transmission	M18	25 Nm

TIGHTENING TORQUE SPECIFICATION

	Type	Thread	Dimension
1AZ Transmission housing, rear section/front section	H/I-transmission		22 Nm
2AZ Lid guide tube/transmission housing	H/I/K-gearbox	M8 x 22	18 Nm
	H/I/K-gearbox	M8 x 30	25 Nm
	H/I/K-gearbox	M6	10 Nm
3AZ Bearing cap/sealing flange	H/I-transmission		10.5 Nm
4AZ Reverse gear wheel axle to intermediate case	H/I-transmission		49 Nm
5AZ Holding plate for reverse gear wheel axle to intermediate case	H/I-transmission		25 Nm
6AZ Transmission closing plate	H/I-transmission	M6	8 Nm
7AZ Grounding cable to transmission		M8	19 Nm
8AZ Ground cable to body		M8	19 Nm