11 62 Exhaust manifold
WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.
11 62 EXHAUST MANIFOLD - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Trim strip at the cylinder head | B46M0/O0/B48M0/O0 | M7 | Replace nuts | |
| 1. Join | 10 Nm | |||
| 2. Join | 16 Nm | |||
| 3. Final torque | 16 Nm | |||
| 2AZ Exhaust manifold to cylinder head | B46M0/O0/B48M0/O0 | M7 | Replace nuts | |
| 1. Join | 10 Nm | |||
| 2. Join | 10 Nm | |||
| 3. Join | 16 Nm | |||
| 4. Join | 16 Nm | |||
| 5. Join | 16 Nm |