00 00 624 Service - vehicle check

• Service - vehicle check 

  Passenger compartment: 

  • Check the HORN, HEADLIGHT FLASHERS AND HAZARD WARNING FLASHERS 
  • Check the INSTRUMENT AND INSCRIPTION LIGHTING, PASSENGER COMPARTMENT AND GLOVEBOX LIGHTING, BLOWER 
  • Check the LIGHTING SYSTEM : if necessary, charge separately to adjust the headlights, function of front/rear and vehicle number plate lighting
  • Check the SEAT BELTS : Condition of seat belt strap, check function of automatic reel, check seat belt locking reel, seat belt buckle, seat belt clip and, if necessary, seat belt clasp for damage
  • Check the WINDSCREEN WIPER AND WASHER SYSTEM FOR FUNCTION AND SETTING 
  • Convertible only:

    Activate the rollover protection system manually.

    NOTE: Open the soft top prior to the triggering process!

Rear/tires: 

• Check the TIRES  (incl. compact spare wheel if present):
  • Tread depth
  • Tread wear pattern
  • External condition
  • Check inflation pressure and correct if necessary.

    Observe the information on tolerance compensation for RDC.

• If fitted:

  BMW Mobility System: Check expiry date on sealant bottle. Replace sealant bottle if necessary (charge separately).

• Check that warning triangle, high-visibility jacket and first-aid kit are present. Check expiry date on first-aid kit (observe national legislation where applicable).
• Initialize RUN FLAT INDICATOR or TYRE PRESSURE CONTROL

Engine compartment: 

• Check the left and right of the units compartment for water and leaves and bill separately for clean-up, if applicable.
• Check the COOLANT LEVEL AND CONCENTRATION , top up where necessary (check both coolant levels on F01, F02, F10 and F30 hybrid cars). Inform customer in event of incorrect fluid level and, if necessary, troubleshoot (charged separately).
• Check the WINDOW GLASS AND HEADLIGHT CLEANING SYSTEM : checking fluid level, topping up if necessary
• If fitted:

  Steering fluid reservoir: Check oil level, top up if necessary. Inform customer in event of incorrect fluid level and, if necessary, troubleshoot (charged separately).

Underfloor: 

• Check for tightness BRAKE LINES AND CONNECTIONS , damage, mounting and correct position
• Check for damage VEHICLE UNDERBODY  including all visible components: correct position, tightness and corrosion
• Check for play in STEERING COMPONENTS :, tightness is applicable, damage and wear

Test drive: 

• Check for ROAD SAFETY :
  • Brakes
  • Steering
  • Shock Absorbers
  • Transmission
• Reset the CBS DISPLAY  according to factory specification
• For vehicles with electronic service history: 

  Record maintenance work in the electronic service history.