00 00 009 Pre-delivery check
WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.
Quality assurance by BMW Service
| Model: | |
| Vehicle identification number: | |
| (Please tick where appropriate) | |
| If necessary Quick Reference Guide: | Discussed and handed over |
| Included with the vehicle: | Owner's Handbook(s) |
| Maintenance record booklet (with national-market version Korea only) | |
| Vehicle key/remote key | |
| If necessary - spare key | |
| The vehicle document case is left in vehicle the vehicle: | |
| Glove box | |
| Storage box | |
| Luggage compartment |
I hereby confirm that I have received the vehicle in perfect condition.
Place and date Signature of vehicle owner
Pre-delivery check by BMW Service
Scopes of inspection: To be kept with the workshop documents
The following work must be carried out on the vehicle by BMW Service prior to delivery.
Model: ____________________________
Vehicle identification number: ____________________________
* Denotes optional extra or national-market version. Observe possible changes in this regard.
| Scopes of inspection: to be kept with the vehicle documents | |||
| Accessory items | OK | Not OK | not present |
| For F01, F02 and F03 only: ECE: Place cup holder insert in glove box US: Insert cup holder insert into cup holder receptacle |
|||
| For M6 only (F06 and F13): Install front spoiler | |||
| install other enclosed parts scope (only in Market China: Take high-visibility jacket out of the luggage compartment and stow it in the storage compartment of the driver's door) | |||
| Using BMW Group diagnosis system | OK | Not OK | not present |
| Carry out "CBS pre-delivery check" in the Service Function path under Maintenance | |||
| Deactivate transportation mode | |||
| Perform the following additional work only with SA5GB: Activating stolen vehicle tracking* | |||
| Reset average mileage/kilometers driven | |||
| Enter first registration | |||
| Set on-board date | |||
| Set statutory inspection dates* | |||
| Enter service telephone numbers | |||
| BMW TeleServices*: Activate | |||
| Navigation system*: Activate the roadmap. Check the up-to-dateness of the roadmap and update if necessary. | |||
| Check battery, observe notes in the diagnosis system, if applicable, charge battery | |||
| Delete fault memory | |||
| Carry out vehicle test, eliminate faults if necessary | |||
| Engine compartment | OK | Not OK | not present |
| Check for cleanliness | |||
|
NOTE:
It is possible that the cooling system has been filled above the maximum mark ex works. Do not adjust the coolant level. The normal coolant level is reached while driving the vehicle.
|
|||
| Fluid tank for washer fluid | OK | Not OK | not present |
| Check fluid level and top up if necessary, where required with antifreeze additive | |||
| Labels | OK | Not OK | not present |
| Apply label for BMW Group Mobile Service | |||
| Body, interior equipment, vehicle underbody | OK | Not OK | not present |
| Check for transportation damage | |||
| For F10, F11 and F18 with automatic transmission: Check that the cupholder cover is functioning correctly and engage the cupholder insert correctly if necessary |
|||
| Spring blocker* | OK | Not OK | not present |
| Remove | |||
| Tires | OK | Not OK | not present |
| Checking tire pressure Observe the information on tolerance compensation for RDC. |
|||
| Initialize Run Flat Indicator (RPA) or tire pressure control (RDC) | |||
| For winter tires* attach the label V-max. | |||
| Maintenance record booklet* (with national-market version Korea only) | OK | Not OK | not present |
| Stamp pre-delivery check/enter vehicle identification number | |||
| Attach documentation (glove box/storage box/luggage compartment) | OK | Not OK | not present |
| Rider's Manual | |||
| Maintenance record booklet (with national-market version Korea only) | |||
| Contact booklet | |||
| BMW Group Mobile Service brochure | |||
| Include key/remote control (make note of number) | |||
| Indicator/warning lights and Check Control | OK | Not OK | not present |
| Check and remove fault if applicable | |||
| Service and parking brake | OK | Not OK | not present |
| Transport and immobilization periods of 3-6 weeks: Check for correct operation |
|||
| In event of transportation and immobilization periods of more than 6 weeks: Brake in | |||
| Interior mirror with digital compass* | OK | Not OK | not present |
| Calibrate system | |||
| Transportation lock* and vehicle cleaning | OK | Not OK | not present |
| Remove the TRANSPORTATION PROTECTIVE FILM | |||
| Clean inside and outside of vehicle | |||
| Notes: | |||
Date
Mechanic
Workshop Supervisor