LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> 340i xDrive Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 252 (Mechanical Special Tools -- 340I, F30) >> Special Tools >> 0 495 756 Installation aid

0 495 756 Installation aid

WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959 Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959 Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  


Use Tool set no longer exists - can only be ordered as separate components. (Installation set) For removing and installing the Teflon rings on the injector.
G04755511Courtesy of BMW OF NORTH AMERICA, INC.
COMPRISING - SPECIAL TOOLS DESCRIPTION

No. BMW order number Replaced by Description In conjunction with
1 0 495 757 (13 0 191)  2 452 959  Pliers 
Was replaced by: 2452959.		  
2 0 495 758 (13 0 192)    Holding sleeve 
(Assembly sleeve 1)		  
3 0 495 759 (13 0 193)    Holding sleeve 
(Assembly sleeve 2)		  
4 0 495 760 (13 0 194)    Holding sleeve 
(Assembly sleeve 3)		  
5 0 495 761 (13 0 195)    Installation aid 
(Mounting cone)		  
scientia non olet · About LEMON Manuals