22 32 001 Replacing rubber mount for transmission mounting

WARNING: This page is about a different car, the 2018 BMW 340i and 2017 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove REAR UNDERBODY PROTECTION .
Support transmission with lifter.

Unscrew nuts (1).

Tightening torque 22 32 2AZ .

Release screws (3).

Tightening torque 22 32 3AZ .

Remove transmission cross member (2).

Remove rubber mount from transmission crossmember.

Tightening torque 22 32 4AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Note the installation position of rubber mount (1) relative to transmission cross-member (2).

Arrow shows in direction of engine/front of vehicle.

Courtesy of BMW OF NORTH AMERICA, INC.