Crankshaft Position Sensor, Knock Sensor
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
1214 ELECTRONIC SWITCHING OR CONTROL UNITS - TIGHTENING TORQUES SPECIFICATION
| Camshaft position sensor to cylinder head cover | ||
| TS5x20 | Tightening torque | 4 Nm |
| Crankshaft sensor to crankcase | ||
| TS5x20 | Tightening torque | 4.6 Nm |
| Knock sensor to crankcase | ||
| M8x30 | Tightening torque | 21.5 Nm |
| Thermostat holder to crankcase/end cover | ||
| M6X16 | Tightening torque | 8 Nm |