REP-TAT-P-1362-02 Installing hot film air mass meter
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
- Install the hot film air mass meter (3).
- Tighten down screws (2).
TIGHTENING TORQUES SPECIFICATION
| Hot film air mass meter to intake silencer |
| Screw TS 4x16 |
tightening torque |
1.5 Nm |
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Connect the connector (1), it should lock audibly.