REP-TAT-P-1353-02 Install the high-pressure line between the high-pressure rail and the high-pressure pump
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
- Thread in and install the high pressure line (3).
- Tighten union nut (1) hand tight.
- Tighten union nut (1).TIGHTENING TORQUES SPECIFICATION
High pressure line between the rail and the high pressure pump M14x1, 5 tightening torque 33 Nm - Tighten down screw (2).TIGHTENING TORQUES SPECIFICATION
Fuel line to cylinder head cover 6x18 tightening torque 7 Nm - Check fuel system for leak tightness.