33 17 Rear axle final drive suspension
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
3317 REAR AXLE FINAL DRIVE SUSPENSION - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Instructions | Torque Specification | |
|---|---|---|---|---|
| 1AZ Rear differential to rear axle carrier, front | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M12 | FOLLOW REPAIR INSTRUCTION . | 100 Nm |
| 2AZ Rear differential to rear axle carrier, rear | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M14 | OBSERVE INSTRUCTIONS IN REPAIR MANUAL
. Replace nut. |
165 Nm |
| 3AZ Vibration absorber to screw connection of rear axle differential, rear | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M8 | 28 Nm | |
| 4AZ Vibration absorber to rear axle support, rear | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M8 | 19 Nm | |
| 5AZ Vibration absorber to rear axle differential | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M12 | Replace screw. | 100 Nm |
| 6AZ Vibration absorber to screw connection of rear axle differential, rear | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M10x32 | Replace screw. | |
| Jointing torque | 56 Nm | |||
| Angle of rotation | 90° | |||
| 7AZ Vibration absorber to screw connection of rear axle differential, rear | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | Torx E14 M 10x32 | Replace screw. | |
| Jointing torque | 56 Nm | |||
| Angle of rotation | 90° |