21 52 Clutch operation (hydraulic)
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
2152 CLUTCH OPERATION (HYDRAULIC) - TIGHTENING TORQUES SPECIFICATION
| Type | Tightening specifications | Dimension | |
|---|---|---|---|
| 1AZ Clutch slave cylinder to clutch housing/transmission housing | F06/F10/F11/F12/F13/F18/F20 N47/F25/F26/F30/F31/F34 N47/F80/F82/F83 | Replace nuts | 22 Nm |
| F20/F21/F22/F23/F30/F31/F32/F33/F34/F35-N13/N20/F10-N20/F36/F87 | Replace screws | 19 Nm | |
| 2AZ Clutch master cylinder on bearing support | F20/F21/F22/F23/F30/F31/F32/F34/F35/F36/F80/F82/F83/F87 | 22 Nm |