REP-TAT-P-1800-01 Remove exhaust system
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Hot surfaces.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
CAUTION:
Component with heavy weight.
Injury hazard!
Injury hazard!
- Note component's center of gravity.
- Support component using a jack.
- Secure component against falling off the jack.
- Unfasten clamp (1).
- Loosen nut (2).
- Unlock connector (1) and pull off.
- Loosen nuts (2).
- Lower and remove exhaust system with assistance of a second person.