REP-TAT-P-1261-02 Installing the oil pressure switch

WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.

Guide in and install oil pressure switch (2).

Tighten oil pressure switch (2).

TIGHTENING TORQUES SPECIFICATION

Oil pressure switch to crankcase
M12X1, 5	tightening torque	16.5 Nm

Connect and lock the connector (1).
The connector (1) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert and install the holder (2).

Tighten the screws (1).

TIGHTENING TORQUES SPECIFICATION

Thermostat holder to crankcase/end cover
M6X16	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.