LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> 340i xDrive Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 231 (Engine Electrical System - Repair (F30, 6-CYL RWD)) >> 12 14 Engine Control Module And Sensors >> 12 14 700 Programming/encoding the control unit (DME)

12 14 700 Programming/encoding the control unit (DME)

WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.

Switch off ignition. 

Connect diagnostic system.

Switch the ignition on.

Select "coding" program.

Follow the instructions in the diagnostic system.

Adjust the following control units:

scientia non olet · About LEMON Manuals