REP-TAT-P-1214-02 Install camshaft position sensor of intake camshaft

WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.

Thread in and install the camshaft position sensor of the intake camshaft (3).

Tighten down screw (2).

TIGHTENING TORQUES SPECIFICATION

Camshaft position sensor to cylinder head cover
TS5x20	Tightening torque	4 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Connect and lock the connector (1).
The connector (1) must engage audibly.