0000 Pre-delivery check
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
Model:
Vehicle identification number:
(Please tick where appropriate)
If necessary Quick Reference Guide:
Discussed and handed over
Included with the vehicle:
Owner's Handbook(s)
Maintenance record booklet (with national-market version Korea only)
Vehicle key/remote key
If necessary - spare key
The vehicle document case is left in vehicle the vehicle:
Glove box
Storage box
Luggage compartment
I hereby confirm that I have received the vehicle in perfect condition.
Place and date Signature of vehicle owner
The following work should be performed on BMW vehicles prior to delivery:
| Scopes of inspection: to be kept with the vehicle documents | |||||
|---|---|---|---|---|---|
| Model: | |||||
| Vehicle identification number: | |||||
| Accessory items | OK | Not OK | not present | ||
| For F01, F02 and F03 only: ECE: Place cup holder insert in glove box US: Insert cup holder insert into cup holder receptacle |
|||||
| For M6 only (F06 and F13): Install front spoiler | |||||
| install other enclosed parts scope (only in Market China: Take high-visibility jacket out of the luggage compartment and stow it in the storage compartment of the driver's door) | |||||
| Using BMW Group diagnosis system | OK | Not OK | not present | ||
| Carry out "CBS pre-delivery check" in the Service Function path under Maintenance | |||||
| Deactivate transportation mode | |||||
| Perform the following additional work only with SA5GB: Activating stolen vehicle tracking(1) | |||||
| Reset average mileage/kilometers driven | |||||
| Enter first registration | |||||
| Set on-board date | |||||
| Set statutory inspection dates(1) | |||||
| Enter service telephone numbers | |||||
| BMW TeleServices(1): Activate | |||||
| Navigation system(1): Activate the roadmap. Check the up-to-dateness of the roadmap and update if necessary. | |||||
| Check battery, observe notes in the diagnosis system, if applicable, charge battery | |||||
| Delete fault memory | |||||
| Carry out vehicle test, eliminate faults if necessary | |||||
| Engine compartment | OK | Not OK | not present | ||
| Check for cleanliness | |||||
|
NOTE:
It is possible that the cooling system has been filled above the maximum mark ex works. Do not adjust the coolant level. The normal coolant level is reached while driving the vehicle.
|
|||||
| Fluid tank for washer fluid | OK | Not OK | not present | ||
| Check fluid level and top up if necessary, where required with antifreeze additive | |||||
| Labels | OK | Not OK | not present | ||
| Apply label for BMW Group Mobile Service | |||||
| Body, interior equipment, vehicle underbody | OK | Not OK | not present | ||
| Check for transportation damage | |||||
| For F10, F11 and F18 with automatic transmission: Check that the cupholder cover is functioning correctly and engage the cupholder insert correctly if necessary |
|||||
| Spring blocker (1) | OK | Not OK | not present | ||
| Remove | |||||
| Tires | OK | Not OK | not present | ||
| Checking tire pressure Observe the information on tolerance compensation for RDC. |
|||||
| Initialize RUN FLAT INDICATOR (RPA) or TIRE PRESSURE CONTROL (RDC) | |||||
| For winter tires(1) attach the label V-max. | |||||
| Maintenance record booklet (1) (with national-market version Korea only) | OK | Not OK | not present | ||
| Stamp pre-delivery check/enter vehicle identification number | |||||
| Attach documentation (glove box/storage box/luggage compartment) | OK | Not OK | not present | ||
| Rider's Manual | |||||
| Maintenance record booklet (with national-market version Korea only) | |||||
| Contact booklet | |||||
| BMW Group Mobile Service brochure | |||||
| Include key/remote control (make note of number) | |||||
| Indicator/warning lights and Check Control | OK | Not OK | not present | ||
| Check and remove fault if applicable | |||||
| Service and parking brake | OK | Not OK | not present | ||
| Transport and immobilization periods of 3-6 weeks: Check for correct operation |
|||||
| In event of transportation and immobilization periods of more than 6 weeks: Brake in |
|||||
| Interior mirror with digital compass (1) | OK | Not OK | not present | ||
| Calibrate system | |||||
| Transportation lock (1) and vehicle cleaning | OK | Not OK | not present | ||
| REMOVE THE TRANSPORTATION PROTECTIVE FILM | |||||
| Clean inside and outside of vehicle | |||||
| Notes: | |||||
|
|||||
Date Mechanic Workshop Supervisor