REP-TAT-P-3213-02-F30 Install the electromechanical steering gear

WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.

Insert the electromechanical steering gear into the front axle support.
Replace the screws (2) and nuts.
Parts : Bolts, nuts

Tighten the bolts (2) and nuts.

TIGHTENING TORQUES SPECIFICATION

Electromechanical steering gear to front axle support
M10 Replace screws and nuts.	56 Nm

Connect connectors (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.